Siemens FST020 Function Manual Download Page 148

Page: 148 / 194

Maintenance and diagnostics

4.4 Diagnostics

FST020 Function manual

146

Function Manual, 09/2017, A5E42949526-AA

Options Overflow; Underflow; Fail--safe behaviour active; Cable break; Loop current deviation -

Output current cannot be established (read back deviation > 0.1 mA)

Operation mode is set to Current output

Options Overflow; Underflow; Fail-safe behaviour active
Operation mode is set to Frequency output

Options The pulse output has reached maximum pulse output frequency; Fail-safe behaviour active
Operation mode is set to Pulse output

Related
This parameter is only available if Operation mode is set to Current output, Frequency output

or Pulse output.

Path

Maintenance and diagnostics

→

Diagnostics

→

Inputs and outputs

→

Channel 2 - output

→

Error status

4.4.3.2

Channel 3 - relay

4.4.3.2.1 Channel 3 - relay

Description
The channel value can be viewed in this parameter.

Related
This parameter is only available if Operation mode is set to On.

Path

Maintenance and diagnostics

→

Diagnostics

→

Inputs and outputs

→

Channel 3 - relay

→

Channel value

4.4.3.3

Channel 4 - Input/output

4.4.3.3.1 Operation mode - (read only)

Description
The set Operation mode can be viewed in this parameter.

Setting Off; Frequency output; Pulse output
Default Off

Summary of Contents for FST020



































































































































































































Search results

Summary of Contents for FST020

Reviews:

Siemens FST020, Function Manual, Page: 148 / 194

Search results

Summary of Contents for FST020

Reviews: