Siemens FST020 Function Manual Download Page 102

Page: 102 / 194

Setup

3.10 View 3

FST020 Function manual

100

Function Manual, 09/2017, A5E42949526-AA

3.9.11

Trend scale lower limit

Description
The Trend Scale Lower Limit defines the scaling lower limit of the value axis for the fixed

mode.

Setting
Default 0

Related
This parameter is only available if Trend Scale Mode is set to Fixed.

Path

Setup

→

Display

→

→

Trend Scale Lower Limit

3.9.12

Trend scale upper limit

Description
The Trend Scale Upper Limit defines the scaling upper limit of the value axis for the fixed

mode.

Setting options

Default setting

Related
This parameter is only available if Trend Scale Mode is set to Fixed.

Path

Setup

→

Display

→

→

Trend Scale Upper Limit

3.10

3.10.1

Enable or disable

Description
In this parameter View 3 can be enabled.

Setting Disabled; Enabled
Default Enabled

Summary of Contents for FST020



































































































































































































Search results

Summary of Contents for FST020

Reviews:

Siemens FST020, Function Manual, Page: 102 / 194

Search results

Summary of Contents for FST020

Reviews: