Siemens FST020 Function Manual Download Page 189

Page: 189 / 194

FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA

187

Support

A.1

Technical support

If you have any technical questions about the device described in these Operating

Instructions and do not find the right answers, you can contact Customer Support:

●

Via the Internet using the Support Request:

Support request (

http://www.siemens.com/automation/support-request

)

●

Via Phone:
–

Europe: +49 (0)911 895 7222

–

America: +1 423 262 5710

–

Asia-Pacific: +86 10 6475 7575

Further information about our technical support is available on the Internet at

Technical support (

http://support.automation.siemens.com/WW/view/en/16604318

)

Service & Support on the Internet

In addition to our documentation, we offer a comprehensive knowledge base online on the

Internet at:
Service and support (

http://www.siemens.com/automation/service&support

)

There you will find:

●

The latest product information, FAQs, downloads, tips and tricks.

●

Our newsletter, providing you with the latest information about your products.

●

Our bulletin board, where users and specialists share their knowledge worldwide.

●

You can find your local contact partner for Industry Automation and Drives Technologies

in our partner database.

●

Information about field service, repairs, spare parts and lots more under Services.

Additional Support

If you have additional questions about the device, please contact your local Siemens

representative and offices at:
Local contact person (

http://www.automation.siemens.com/partner

)

Summary of Contents for FST020



































































































































































































Search results

Summary of Contents for FST020

Reviews:

Siemens FST020, Function Manual, Page: 189 / 194

Search results

Summary of Contents for FST020

Reviews: