manualshive.com logo in svg

Siemens 7ML1301-1, Instruction Manual, Page: 90 / 99

Share
Download
Siemens 7ML1301-1 Instruction Manual Download Page 90

Page 86

SITRANS LG200 – INSTRUCTION MANUAL 

7ML19985KA02

HART Communicat

ions

Appendix E: HART Communications 

Highway Addressable Remote Transducer, HART, is an industrial protocol that is 
superimposed on the 4-20 mA signal. It is an open standard, and full details about HART 
can be obtained from the HART Communication Foundation at www.hartcomm.org

SITRANS LG200 can be configured over the HART network using either the HART 
Communicator 375 by Fisher-Rosemount, or a software package. The recommended 
software package is the SIMATIC Process Device Manager (PDM) by Siemens.

SIMATIC PDM

This software package is designed to permit easy configuration, monitoring, and 
troubleshooting of HART devices. The HART EDD for SITRANS LG200 was written with 
SIMATIC PDM in mind and has been extensively tested with this software.

For more information, see 

Operating via SIMATIC PDM

  on page 45.

HART Device Description (EDD) 

In order to configure a HART device, the configurator must have the HART Device 
Description for the instrument in question. HART DDs are controlled by the HART 
Communication Foundation. Please check with the HART Communication Foundation for 
the availability of the HART EDD for SITRANS LG200. Older versions of the library will 
have to be updated in order to use all the features of SITRANS LG200.

junction

RL > 250 ohms

current meter

power supply

control room 

display

Summary of Contents for 7ML1301-1




































































































Reviews:

No comments