Siemens 7ML1301-1 Instruction Manual Download Page 39

Page: 39 / 99

7ML19985KA02

SITRANS LG200 – INSTRUCTION MANUAL

Page 35

Wiring

Power

Connecting SITRANS LG200

Within the transmitter enclosure, connections are made to the terminal blocks and the
ground connectors. The wiring instructions for the LG200 transmitter depend on the
application:

•

General Purpose or Non-incendive (Class I, Div. 2)

•

Intrinsically Safe

•

Explosion Proof

WARNINGS:

• Installation shall only be performed by qualified personnel and in

accordance with local governing regulations.

• All HART versions of SITRANS LG200 transmitter operate at voltages of

11 to 36 V DC at the device terminals. Higher voltage will damage the
transmitter.

Notes:

• Use shielded twisted pair cable: 0.5 to 1 mm² (AWG 22 to 18).

WARNING: Check the nameplate on your instrument, to verify the
approval rating.

Note:

Use shielded twisted pair cable: 0.5 to 1 mm² (AWG 22 to 18).

WARNING: Explosion hazard. Do not disconnect equipment unless
power has been switched off or the area is known to be non-
hazardous.

earth terminal

Summary of Contents for 7ML1301-1




































































































Search results

Summary of Contents for 7ML1301-1

Reviews:

Siemens 7ML1301-1, Instruction Manual, Page: 39 / 99

Search results

Summary of Contents for 7ML1301-1

Reviews: