manualshive.com logo in svg

Siemens 7ML1301-1, Instruction Manual, Page: 8 / 99

Share
Download
Siemens 7ML1301-1 Instruction Manual Download Page 8

Page 4

SITRANS LG200 – INSTRUCTION MANUAL

7ML19985KA02

SITRAN

S LG20

0

SITRANS LG200 Overview

SITRANS LG200 is a guided wave radar transmitter for short and medium range level, 
level/interface and volume measurement of liquids and solids. It is unaffected by changes 
in process conditions, high temperatures and pressures, and steam.

The device consists of an electronic enclosure coupled to a coaxial probe, single or twin 
solid rod, or flexible cable probes. LG200 can be configured to measure Level Only, Level 
and Volume, Interface, or Interface and Volume, depending on probe selection.

SITRANS LG200 supports HART

1

 

communication protocol, and SIMATIC PDM

 

software.

Programming

SITRANS LG200 is very easy to install and configure using the 3 programing buttons on 
the device. You can also program the LG200 using the HART hand-held communicator, or 
using SIMATIC PDM via HART.

Applications

•

liquids and slurries

•

light solids including pellets, grain

 and 

powders

Approvals and Certificates

SITRANS LG200 is available with General Purpose approval, or with approvals for 
hazardous areas. For details, see page 18.

1.

HART® is a registered trademark of the HART Communication Foundation

Summary of Contents for 7ML1301-1




































































































Reviews:

No comments