Siemens 7ML1301-1, Instruction Manual, Page: 78 / 99

Page 74 SITRANS LG200 – INSTRUCTION MANUAL 7ML19985KA02
A: P
a
ra
met
e
r List
Run Time (factory authorized personnel only) 69
Safety Zone Alarm Reset (SZ Alarm Reset) 67
(User password)
Safety Zone Fault (SZ Fault) 66
Default: None (User password)
Safety Zone Height (SZ Height) 66
Default: 2.0 in (User password)
Safety Zone Hysteresis (Sz Hyst) (factory authorized personnel only) 71
Default: 1.0 in (Superuser password)
Scale Offset (Scl Ofst) (factory authorized personnel only) 70
Default: 0 (Factory password)
Sensitivity (Senstvty) 64
Default: 55, probe model dependent ((User or Superuser password)
Strapping Table (Breakpoints) 62
Default: 0.0
Strapping Table (StrapTbl) 62
Default: Pt Lvl: 0.0 cm, Pt Vol 0.0 g (User password)
Target Calibration (Lvl only) (factory authorized personnel only)1 70
Default: 1000
Threshold (Threshld) 67
Default: Fixed (User password)
Trim 20 mA (Trim 20) 67
Default: 3266 (User password)
Trim 4 mA (Trim 4) 67
Default: 651 (User password)
Trim Level (Trim Lvl) 67
Default: 0.0 in (User password)
Dielectric (Dielctrc) 63
Default: 2.10 (User password)
Window (Window) (factory authorized personnel only) 69
Default: 204 (Factory password)
Signal (Signal) (factory authorized personnel only) 70
Target Amplitude (Lvl only) (factory authorized personnel only)1 70
Target Ticks (Lvl only) (factory authorized personnel only)1 70
Parameter Name Page Number