Siemens 7ML1301-1, Instruction Manual, Page: 61 / 99

7ML19985KA02 SITRANS LG200 – INSTRUCTION MANUAL Page 57
P
a
ra
m
e
te
r R
e
fe
re
n
c
e
Parameter Reference
The following parameter listing explains the SITRANS LG200 parameter menus. Each
parameter is marked if it applies specific application types (Level, Volume, Interface/
Level, Interface/Volume).
The parameters are in the order they would appear if the arrow keys were used to scroll
through the menu.
To reset SITRANS LG200 to factory defaults, set each parameter to the default parameter
settings shown in user parameters below or listed in
Appendix A: Alphabetical Parameter
List
on page 72.
Display loop
Run Mode Display Options
*Status*
If you choose *Status*, the LG200 display will show Status, Level , % Output, and Loop
(and/or Volume, and/or Interface/Level, and/or Interface/Volume) values cycling every
two seconds.
Level
Displays level value in selected units.
Values (View only)
*Status*
*Level* or *Volume* or *IfcLvl* or *IfcVol*
*% Out*
*Loop*
Level: Measures
level only in
selected level
units Volume: Measures
volume only in
selected volume
units Interface/Level
(Ifc/Level):
Measures
upper level and
interface level Interface/Volume
(Ifc/Vol): Measures
interface level and
interface volume
Values (View only)
Level xxx.x (in, cm, ft, m)