SICK IVC-2D Page 43 Reference Manual Download

Page: 43 / 253

Reference Manual

Chapter

IVC-2D

Programming

3.8.4

Changing Macro Properties

To change name and
description of a macro

Right-click the macro in the tree view and choose

Macro

Properties

from the pop-up menu. This opens the Macro

Properties window. Enter macro name and a description in
the

Name

and

Description

fields and click

To change a macro
icon

You need an icon with file extension

.ico

consisting of two

images. One 16 x 16 pixels and one 32 x 32 pixels. The
smaller is used in the IVC Studio tree view, and the larger in
the IVC Studio toolbar.
Right-click the macro in the tree view and choose

Macro

Properties

from the pop-up menu. Enter the path to the icon

image in the

Icon

field, or use the browse button, and click

To specify arguments
and results

Right-click the macro in the tree view and choose

Macro

Properties

from the pop-up menu. Select one of the tabs

Arguments

Results

. Add arguments and results by using the

button.

Summary of Contents for IVC-2D





























































































































































































































































Search results

Summary of Contents for IVC-2D

Reviews:

Related manuals for IVC-2D

Brands by name

Popular brands

SICK IVC-2D, Reference Manual

Search results

Summary of Contents for IVC-2D

Reviews:

Related manuals for IVC-2D

Brands by name

Popular brands