SICK IVC-2D Page 197 Reference Manual Download

Page: 197 / 253

Reference Manual

Chapter

IVC-2D

197

Communication

12=Save Mode

Controls how the retrieved file shall be stored in the
camera:

RAM Only

– The file will be stored in RAM only in an

image bank, data block or in the table.

FFS Only

– The file will be stored only on the flash. The

parameters 9-11 must in this case be set to -1

RAM and FFS

– The file will be stored both in RAM and

on the flash.

Returned Values

None

Error Messages

Err=8900

Could not connect to the FTP server.

Check IP address and port number.

Check user name and password.

Check firewall settings and try using Passive mode.

Err=8901

The account for the specified user name is invalid

Err=8902

Access denied.

Err=8903

Timeout

Err=8904

No connection to the FTP server

Err=8905

The specified file was not found

Err=8906

The specified directory was not found

Err=8909

At least one datatype (image, datablock or table) must be speci-
fied.

Err=8910

When storing a file to the flash, the parameters

Data block

Image bank

and

Table index

must be set to -1.

Err=8911

Only one datatype (image, datablock or table) can be specified in
the same call.

Err. = 8960

The amount of dead space on the flash exceeds the specified
threshold. Please defragment the disk by using the Clear Unused
Memory option on the Flash menu in the Device list.

Err. = 8961

The automatic defragmentation failed. The camera may need to
be restarted to restore the flash.

Summary of Contents for IVC-2D





























































































































































































































































Search results

Summary of Contents for IVC-2D

Reviews:

Related manuals for IVC-2D

Brands by name

Popular brands

SICK IVC-2D, Reference Manual

Search results

Summary of Contents for IVC-2D

Reviews:

Related manuals for IVC-2D

Brands by name

Popular brands