AFS60 AFM60 EIP WEB operating instructions
44
j.
If the firmware update file has been correctly integrated, the file is uploaded to the
encoder (see Fig. 5).
Fig. 5. “FupFile.bin” is copied
•
While the Firmware is updated, the encoder status LED flashes red, the module and
network status LED flash green.
•
After the firmware has been successfully updated, the encoder resets and the new
application starts.
Warning!
Do not switch the encoder off before the flash process has completed.
The process is identical when updating the WebServer. Just select the
FPGA_WEB_
SW-V255.0.10
directory. The file name is also
FupFile.bin.
The flash process may take
longer because the data is approx. 6 times more.
© SICK AG• Germany • All rights reserved
8018909/1EH9/2021-12-16
Subject to change without notice