Shimadzu GC-2014, Instruction Manual

Page: 54 / 318

3 Installing Packed Columns and Setting Analytical Flow Lines
3.5
3
.
42
GC-2014
3.5
Packed Analysis Using the Single DET
To perform glass packed column analysis using the unit with the single DET (single FID,
ECD, FPD, and FTD for packed analysis), move the dual INJ to the front of the single DET
prior to connecting a column.
1. When a SUS column is used, the dual INJ does not need to be moved.
2. If the single packed INJ is installed in front of the single DET, analysis can be performed without
moving the dual INJ. For detailed descriptions, refer to instruction manual of the single packed INJ.
Fig. 3.5.1 Single DET configuration
CAUTION
Dual INJ is set on the single mode so carrier gas is not fed to the
unspecified port (L on the figure above). Do not connect a column to
the port.
L
(L) (R)
Dual INJ
R
Dual AFC
Dual FID/TCD
Column
L R
Single DET
NOTE