Shihlin electric SDE Series, Manual

Page: 102 / 242

94
No Abbr. Function description
Control
mode
Setting
range
Unit
PC12 VCM
Output speed of maximum analog command
This value decides the output speed while the maximum
permissible voltage is applied.
applied voltage of speed command
output speed = PC12
10

S 0
~30000
rpm
When torque mode is applied, this parameter would become
speed limit when the maximum permissible voltage applied.
applied voltage of torque command
Speed limit = PC12
10

T 0
~30000
PC13 TLC
Torque generated of maximum analog command
To decides the maximum torque generated while the maximum
permissible voltage is applied.
applied voltage of torque command
Torque limit = PC13
10

T 0
~2000
%
Torque generated of maximum analog command
When position or speed mode is applied, this parameter is
used to limit the output speed. Pt, Pr
S
0
~2000
PC14 MOD
Analog monitor output
There are 2 channels of analog monitor provided for users to
check the required signals.
Refer to section 6.9.2 for details. Pt, Pr
S,T
0000h
~0707h
-
PC15 SVZR
Speed analog zero voltage acknowledged range
Treat the applied voltage which is less than PC15 as zero
speed command. S,T 0
~1000
mV
PC16 MBR
Electromagnetic brake output delay time
The parameter PC16 could be used to decide the delay time of
the SON signal off to the MBR signal activated.
See section 6.6.3 for more details.
Pt, Pr
S,T
0
~1000
ms
PC17 ZSP
Zero speed acknowledged range
As motor feedback speed is less than the setting value of
PC17, the servo drive would treat it as zero speed and the ZSP
of DO would be outputted. Pt, Pr
S,T
0
~10000
rpm
PC18 COP1
Stop option and power interruption restart option
The voltage level drop would cause drive to alarm and stop.
Auto-restart function could be applied by the setting of PC18.
0 0 y x
x
：
power interruption restart option
0
：
invalid
1
：
valid
y
：
motor stop option
0
：
stops instantaneously
1
：
decelerates to stop
Pt, Pr
S,T
0000h
~0011h
-