Shibaura SG280E, Workshop Manual

Page: 71 / 111

67
1) Removing the engine
* Remove the mower in advance, if
necessary.
1. Remove the battery cable , and then remove
the battery .
2. Separate the engine harnesses at the connectors.
3. Remove the bolts and nuts at the hinge on the
bonnet, and then remove the bonnet .
4. Drain the coolant from the radiator in the engine.
(Loosen the band, and pull out the flat-head pin.)
5. Remove the muffler.
6. Remove the air cleaner and air cleaner hose.
7. Remove the radiator hoses (upper hose and lower hose ).
5-1 Engine
Fig.5-1-4
Fig.5-1-3
Fig.5-1-1
Fig.5-1-2