Shibaura SG280E, Workshop Manual

Page: 42 / 111

39
18. Water pump assembly
19. Mano-contact (oil pressure switch)
Mano-contact tightening torque N
⋅
m
9.8 to 11.76 (1.0 to 1.2 kgf
⋅
m)
20. Nozzles and holder assembly
Insert the gasket, and tighten to the rated torque.
Nozzle and holder tightening torque N ⋅ m
58.8 to 68.6 (6.0 to 7.0 kgf
⋅
m)
21. Return pipe and injection pipe
Install the return pipe, and then install the injection pipe.
Injection pipe tightening torque N
⋅
m
14.7 to 24.5 (1.5 to 2.5 kgf ⋅ m)
22. V belt (A38.5)
Press the center of the crankshaft pulley and alternator
with your finger (49N), and adjust until they sag 10 to
15mm .
Fig.2-6-25
Fig.2-6-26
Fig.2-6-27
Fig.2-6-28
Return pipe