Sharp SF-2040, Service Manual, Page: 55 / 131

5. To stick the cassette size labels.
Stick the cassette size labels that indicate and correspond to the
desired size on the marked positions for sticking (2 positions). If you
change the size to A5 or 8-1/2 x 5-1/2, take out the paper size
indication plateand stick the size label on the indication plate and
align the sticking line as shown in the figure.
6. To change the paper size indication plate.
Take out the paper size indication plate and insert it so that the name
of set paper size can be seen through the paper size indication
window.
The paper size is written on both front and rear faces of the paper
size indication plate.
7. To install the cassette main unit on the paper
tray.
Install the cassette main unit by putting the four projections into the
corresponding holes of the paper tray.
(7) SF-DM11
Before performing the following procedure, be sure
to remove the power plug of the copier main unit.
1. To remove the rear cabinet of the copier main
unit.
Remove the four screws that fix the rear cabinet of the copier main
unit and remove the rear cabinet.
Size label
Size label for indication plate
Label sticking line (white)
Paper size indication plate
Size label
Paper size indication plate
Paper tray
Cassette main unit
Parts included
ADU drive unit:1pc.
Right stopper:1pc.
Fixing screw(M4 x 8):2pcs.
Fixing screw
Rear cabinet
Fixing screw
5 – 27