background image

78

I-Fax Settings

These settings are used to configure the default settings 
for Internet fax.

I-Fax Own Name and Address Set

This is used to configure the sender name and address 
for Internet fax. The entered sender name and address 
are printed at the top of each fax page you send.

Sender Name

Enter a default sender name (max. of 40 characters).

Own Address

Enter a default sender address (maximum of 56 
characters).

Auto Wake Up Print

When the [POWER] key (

) is "off" (but the main 

power switch is "on") and an Internet fax is received, this 
function activates the machine and prints the fax.
When this function is disabled, received Internet faxes 
are not printed until the [POWER] key (

) is switched 

"on".

Compression Setting

This is used to set the default compression mode for 
Internet fax transmission.
The settings are shown below.

• MH  (G3)
• MMR (G4)

Speaker Volume Setting

This is used to adjust the volume of fax receive signals 
and communication error signals heard through the 
speaker.
A fax receive signal sounds after the machine checks 
the mail server and retrieves received faxes. A 
communication error signal sounds when a delivery 
failed e-mail is received from the destination Internet fax 
machine.

Original Print on Transaction 
Report

When a transaction report is printed, this is used to print 
part of the first page of the transmitted original on the 
transaction report. Select one of the settings below.

• Print Out All Report
• Print Out Error Report Only
• No Printed Report

This setting will not be effective if "

Transaction Report 

Print Select Setting

" below is set to "No Printed Report".

Transaction Report Print Select 
Setting

This is used to select whether or not a transaction report 
will be printed, and if printed, the condition for being 
printed. Select a setting for each of the following 
operations:

Single Sending

• Print Out All Report
• Print Out Error Report Only
• No Printed Report

Broadcasting

• Print Out All Report
• Print Out Error Report Only
• No Printed Report

Receiving

• Print Out All Report
• Print Out Error Report Only
• No Printed Report

When a transaction report is printed, you can have part 
of the first page of the transmitted original printed on the 
transaction report. For more information, see "

Original 

Print on Transaction Report

".

These settings can be configured when the Internet fax expansion kit is installed.

I-Fax Default Settings

Summary of Contents for MX-6201N Series







































































































































































































































































































































































































































































































































































































































































































































Reviews: