Sharp MX-6201N Series Page 445 User Manual Download

Page: 445 / 710

Specify the original size.

(1) Enter the original size.

• Touch the [X] key and enter the horizontal dimension

(X) of the original with the

keys.

• Touch the [Y] key and enter the vertical dimension (Y)

of the original with the

keys.

(A) To return the original size to the default size, touch the

[Size Reset] key.

(B) To automatically enlarge or reduce the image to fit the

send size, touch the [Fit to Send Size] key. If you wish
to scan the original at the entered original size, there
is no need to touch this key.

(2) Touch the [OK] key.

• The send size will be selected automatically based on the entered original size.

• After selecting Card Shot, you can touch the [Original] key in the base screen to change the original scan size or the

send size. In this case, the screen of this step appears when you touch the scan size key. For the procedure for
setting the send size, see "

Specifying the send size of the image

" (page 60).

Specify the destination.

(1) Touch the [Address Book] key in the base

screen.

(2) Touch one-touch keys of the destinations

that you wish to store in the group.

(3) Touch the [To] key.

• When scanning to USB memory, there is no need to specify the destination. Go to step 5.

• In addition to specification by a one-touch key, a destination can also be specified by a search number. You can

also manually enter an e-mail address or look up an e-mail address in a global address book. For more information,
see "

2. ENTERING DESTINATIONS

" (page 20).

Press the [COLOR START] key (

)

or the [BLACK & WHITE START] key
(

) to scan the front side of the card.

If the destination is an Internet fax destination, press the [BLACK & WHITE START] key (

To cancel scanning...

Press the [STOP] key (

) to cancel the operation.

Scan/Special Modes

Card Shot

(1 8 1/2)
inch

Cancel

Fit to

Send Size

Size Reset

(1)

(B)

(2)

(A)

AAA AAA

III III

GGG GGG

EEE EEE

CCC CCC

HHH HHH

FFF FFF

DDD DDD

BBB BBB

ABCD

Frequent Use

EFGHI

JKLMN

OPQRST

UVWXYZ

Global

Address Search

Address Entry

Sort Address

Address Review

Condition

Settings

JJJ JJJ

(3)

(2)

Summary of Contents for MX-6201N Series







































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-6201N Series

Reviews:

Related manuals for MX-6201N Series

Brands by name

Popular brands

Sharp MX-6201N Series, User Manual

Search results

Summary of Contents for MX-6201N Series

Reviews:

Related manuals for MX-6201N Series

Brands by name

Popular brands