Sharp MX-6201N Series User Manual Download

Page: 545 / 710

Touch the key of the file that you wish to
print.

• The

icon appears to the left of keys of files that can be

printed.

• The

icon is displayed to the left of keys of folders in the

USB memory. To display the files and folders in a folder,
touch the key of the folder.

• A total of 100 keys of files and folders can be displayed.

• Touch the

key to move up one folder level.

• When you move down a folder level by touching a folder key, the

key appears in the top right corner of the

screen. Touch this key to return to the root folder (the top folder level of the selected USB memory).

• Touch the [File or Folder Name] key (or the [File Name] key) to change the order of the files and folders displayed

on the screen. The order switches between ascending order and descending order each time you touch the key.

Print the selected file.

(1) Select print conditions.

If you selected a file (PCL or PS) in step 3 that includes
print settings, the settings will be applied.

(2) Touch the [Print] key.

Printing begins after the selected file is transferred. When
the message "Job stored. ..." appears in the touch panel,
touch the [OK] key.

To cancel printing...

To cancel printing while the file is being transferred, touch the [Cancel] key in the message screen that appears in the
touch panel.

Remove the USB memory device from
the machine.

When you select a PDF file that has a password, you must enter the password in the job status screen to begin printing.

☞

PRINTING AN ENCRYPTED PDF FILE

(page 66)

File

Fol

Name

USB

Memory

File

-01.

File

-02.

File

-03.

File

-04.

File

-05.

Fol

Output

Quic

File

Paper Select

Auto

Cancel

B/W Print

Fit To Page

File

-01.

Number o

Prints

(

999)

(1)

(2)

Summary of Contents for MX-6201N Series







































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX-6201N Series

Reviews:

Related manuals for MX-6201N Series

Brands by name

Popular brands

Sharp MX-6201N Series, User Manual

Search results

Summary of Contents for MX-6201N Series

Reviews:

Related manuals for MX-6201N Series

Brands by name

Popular brands