manualshive.com logo in svg

Sharp MX-6201N Series, User Manual

Share
Download
Sharp MX-6201N Series User Manual Download Page 307

78

5

Press the [BLACK & WHITE START] key 
(

) to scan the front of the card.

To cancel scanning...

Press the [STOP] key (

).

6

Turn the card over so that the back is 
face down, and press the [BLACK & 
WHITE START] key (

) to scan the 

back of the card.

Before scanning the back of the card, you can touch the [Configure] key in the touch panel to change the exposure.

To cancel scanning...

Press the [STOP] key (

).

7

Touch the [Read-End] key.

If you will continue by scanning the front of the card, you can touch the [Configure] key to change the exposure, 
resolution, scan size, and send size.

• The ratio cannot be specified and "Rotation Sending Setting" cannot be selected.

• This function cannot be used in direct transmission mode or when the speaker is used to dial.

To cancel Card Shot...

Touch the [Cancel] key in the screen of step 3.

Place next original.       

Press [Start].

When finished, press [Read-End].

(Pg.No.x)

Configure

Read-End

Summary of Contents for MX-6201N Series







































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands