manualshive.com logo in svg

Sharp MX-6201N Series, User Manual

Share
Download
Sharp MX-6201N Series User Manual Download Page 26

26

Paper that cannot be used

• Special media for inkjet printers

(fine paper, glossy paper, glossy film, etc.)

• Carbon paper or thermal paper
• Pasted paper
• Paper with clips
• Paper with fold marks
• Torn paper
• Oil-feed transparency film

• Thin paper less than 15 lbs. (55

g

/m

2

)

• Paper that is 69 lbs. (257

g

/m

2

) or heavier

• Irregularly shaped paper
• Stapled paper
• Damp paper
• Curled paper
• Paper with a wave-like pattern due to moisture 

absorption

Non-recommended paper

• Iron-on transfer paper
• Japanese paper

• Reverse side of paper already printed on by another 

printer or copier.

• Perforated paper

• Various types of plain paper and special media are sold. Some types cannot be used with the machine. Contact your 

dealer or nearest SHARP Service Department for advice on using these types of paper.

• The image quality and toner fusibility of paper may change due to ambient conditions, operating conditions, and paper 

characteristics, resulting in image quality inferior to that of SHARP standard paper. Contact your dealer or nearest SHARP 
Service Department for advice on using these types of paper.

• The use of non-recommended or prohibited paper may result in skewed feeding, misfeeds, poor toner fusing (the toner 

does not adhere to the paper well and can be rubbed off), or machine failure.

• The use of non-recommended paper may result in misfeeds or poor image quality. Before using non-recommended paper, 

check if printing can be performed properly.

Summary of Contents for MX-6201N Series







































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands