Sharp AR-650, Service Handbook

Page: 58 / 200

1 - 51 ADJUSTMENT
(f) Right margin
(1) Make an A4/LT 100% test copy from LCF with the ADF open.
(2) Follow the procedure below so that the blank space at the right edge of the copy is adjusted at
2mm ± 0.5 mm.
Note: The combination of the right edge blank space and the left edge blank space should be
4mm ± 1mm.
1
→
[432]
→
[START]
→
Adjust by digital keys
→
[SET] or [INT]
→
[E/S]
→
1
(Test copy)
*When the value increases, margin becomes wider (0.0423 mm/STEP).
Notes: 1. Before making a test copy, make sure that [100% A] is appeared on the top of the
message display after the [SET] icon or the [INT] key is pressed, and then make a test
copy.
2. The effective adjustment value is within the range 0 to 255. The default adjustment
value is 0.
Copy movement direction
2mm
(g) Bottom margin
Follow the procedure below to make a test copy.
([0] [5] + [PWR] ON
→
[C]
→
[E/S])
(1) Make an A4/LT 100% test copy from LCF with the ADF open.
(2) Follow the procedure below to adjust so that the blank space at the trailing edge of the copy is
adjusted exactly to 2 mm ± 0.5 mm.
1
→
[433]
→
[START]
→
Adjust by digital keys
→
[SET]/[INT]
→
[E/S]
→
1
(Test copy)
*When the value increases, margin becomes wider (0.0423 mm/STEP).
Notes: 1. Before making a test copy, make sure that [100% A] is appeared on the top of the
message display after the [SET] icon or the [INT] key is pressed, and then make a test
copy.
2. The effective adjustment value is within the range 0 to 255. The default adjustment
value is 0.
Copy movement direction
2mm