Sharp AR-650, Service Handbook

Page: 25 / 200

ADJUSTMENT 1 - 18
05 MODE
CODE ADJUSMENT MODE DEFAULT RANGE DESCRIPTION
PROCEDURE
GROUP
♥
444 PFP registration adjustment. Image on the All 8 0-15 1
drum to the paper’s leading edge.
Test copy available while in the 05 mode.
♥
445 Duplexer registration adjustment. Image on All 8 0-15 1
the drum to the papers’ leading edge.
Toggle between 09 and 05 Mode to make a
test copy.
♥
Key in the value, press the SET key to store or the CLEAR key to reset.
♠
450-0 PFP upper paper alignment (paper buckle) All 14 0-31 6
at the main registration roller. Paper length
330mm and longer.
♠
450-1 PFP upper paper alignment (paper buckle) All 8 0-31 6
at the main registration roller. Paper length
220mm to 329mm.
♠
450-2 PFP upper paper alignment (paper buckle) All 5 0-31 6
at the main registration roller. Paper length
219mm and less.
♠
452-0 PFP middle paper alignment (paper buckle) All 2 0-31 6
at the main registration roller. Paper length
330mm and longer.
♠
452-1 PFP middle paper alignment (paper buckle) All 8 0-31 6
at the main registration roller. Paper length
220mm to 329mm.
♠
452-2 PFP middle paper alignment (paper buckle) All 5 0-31 6
at the main registration roller. Paper length
219mm and less.
♠
Key in Code 450 or 452 press the START key, key in the Sub Code, then press the START key. Key in the value, press SET
key to store or the CLEAR key to reset.
455 Duplexer paper alignment (paper buckle) at All 10 0-31 1
the main registration roller.
■
456-0 PFP lower paper alignment (paper buckle) All 2 0-31 6
at the main registration roller. Paper length
330mm and longer.
■
456-1 PFP lower paper alignment (paper buckle) All 8 0-31 6
at the main registration roller. Paper length
220mm to 329mm.
■
456-2 PFP lower paper alignment (paper buckle) All 5 0-31 6
at the main registration roller. Paper length
229mm and less.
■
Key in Code 456 press the START key, key in the Sub Code, then press the START key. Key in the value, press SET key to
store or the CLEAR key to reset.
#457 LCF paper alignment (paper buckle) at the All 16 0-31 1
main registration roller.
#458 Manual feed paper alignment (paper buckle) All 14 0-31 1
amount at he main registration roller.
#459 PFP upper paper alignment (paper buckle) All 4 0-15 1
at the PFP upper registration roller.
#460 PFP middle paper alignment (paper buckle) All 7 0-15 1
at the PFP middle registration roller.
Increasing the value by 1
shifts the image on the paper
by approximately 0.5mm
towards the papers’ leading
edge. Increasing the value
makes the paper arrive later.
Increasing he value by 1 shifts
the image on the paper by
approximately 0.5mm towards
the papers’ leading edge.
Increasing the value makes
the paper arrive later.
Increasing the value by 1
increases the aligning (paper
buckle) by 0.9mm.
Increasing the value by 1
increases the aligning (paper
buckle) by 0.9mm.
Increasing the value by 1
increases the aligning (paper
buckle) by 0.9mm.
Increasing the value by 1
increases the aligning (paper
buckle) by 0.9mm.
Increasing the value by 1
increases the aligning (paper
buckle) by 0.9mm.
Increasing the value by 1
increases the aligning (paper
buckle) by 0.9mm.
Increasing the value by 1
increases the aligning (paper
buckle) by 0.9mm.
Increasing the value by 1
increases the aligning (paper
buckle) by 0.9mm.
Increasing the value by 1
increases the aligning (paper
buckle) by 0.9mm.
Increasing the value by 1
increases the aligning (paper
buckle) by 0.9mm.
Increasing the value by 1
increases the aligning (paper
buckle) by 0.9mm.
Increasing the value by 1
increases the aligning (paper
buckle) by 0.9mm.
Increasing the value by 1
increases the aligning (paper
buckle) by 0.9mm.
Increasing the value by 1
increases the aligning (paper
buckle) by 0.9mm.