Sharp AR-650, Service Handbook

Page: 49 / 200

ADJUSTMENT 1 - 42
(c) Transfer belt speed adjustment/printer (Secondary scanning reproduction ratio)
Follow the procedure below to make a test print (PFP middle or lower cassette, A3/LD).
(1) [0] [5] + [PWR] ON
→
[1]
→
[E/S]
→
1
(Digital keys)
(2) Measure the distance “A” the distance between the 5th line and 25th line.
(3) In order to set the distance “A” to 200 mm ± 0.5 mm, use following steps to make the adjustment:
1
→
[488]
→
[START]
→
Set the value
→
[SET] or [INT]
→
[1]
→
[E/S]
→
1
*An increase in the value makes the reproduction scale (distance “A”) longer (in increments
of 0.25mm/step).
Notes: 1. Before making a test print, make sure that [100% A] is appeared on the top of the
message display after the [SET] icon or the [INT] key is pressed, and then make a test
print.
2. The effective adjustment value is within the range 1 to 255.
The default adjustment value is 128.
Print
movement
direction
A
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25