TROUBLE SHOOTING
4 - 12
4.7
Other Service Calls
[C94] M-CPU is abnormal
Is the service call displayed even after the power switch on the main unit is turned OFF then
ON again?
No
Leave as it is and see what happens.
Yes
•
Check the circuit pattern between MCPU (IC32) and MROM (IC31) for open-or short-circuits.
•
Replace the LGC board if this trouble occurs frequently.
[C99] PFC microcomputer is abnormal
Is the service call displayed even after the power switch on the main unit is turned OFF then
ON again?
No
Leave as it is and see what happens.
Yes
•
Check the circuit pattern around the PFC microcomputer (IC21) for open-or short-circuits.
•
Replace the PFC microcomputer or LGC board if this trouble occurs frequently.
[CD1] Fur brush motor lock error
(1) Check whether the fur brush has become locked mechanically.
•
Are there any foreign objects?
•
Are there any toner clumps in the transport section?
(2) Check whether connectors on the LGC board are come off or the pins disconnected, etc..
(3) Replace the brush motor.
(4) Replace the LGC board.
[CD2] Toner auger motor lock error
(1) Check whether the auger has become locked mechanically.
•
Are there any foreign objects?
•
Are there any toner clumps in the transport section?
(2) Check whether connectors on the LGC board are come off or the pins disconnected, etc..
(3) Replace the auger motor.
(4) Replace LGC board.
Summary of Contents for AR-650
