Sharp AR-650, Service Handbook

Page: 14 / 200

1 - 7 ADJUSTMENT
• Test mode (03): Refer to 1.2.1 and 1.2.2.
• Test print mode (04): Refer to “1.2.3 Test print mode”.
• Adjustment mode (05): Refer to “1.2.4 Adjustment mode”.
• List print mode
[9] [START]
[PWR]
(code) [START]
(Start of operation)
[PWR] OFF
101: 05 adjustment code
102: 08 setting code
103: 08 setting code (For tandem)
201: Job access code
• Unit replace mode
[6] [START]
[PWR]
(code) [START]
(Start of operation)
[PWR] OFF
1: Auto-toner adjustment
2: Drum counter reset
• Setting mode (08): Refer to “1.2.5 Setting mode”.
Quick reference chart for self-diagnostic mode
Normal
[0][5]
[S]: START key ON.
[C]: CLEAR key ON.
Warming up
Standby
[C]
[0][1]
All the displays on
the control panel lit
[0][3] [0][5]
[0][8]
Setting mode Adjustment mode Test mode
*1 When the copier is in the adjustment mode which you entered by turning the power switch ON while
pressing keys [0] and [5] simultaneously, pressing keys [0] and [9] simultaneously will set the copier
to the standby mode. In this standby mode only can the adjustment mode be accessed repeatedly
by simply entering [0] and [5].
*2 While all the displays on the control panel are lit, copying is not available. When the copier enters the
standby mode by pressing the [0] [9] or [C], copying is enabled.
*3 When the self-diagnostic mode was used, turn the power OFF, then hand over to the user.
[Power] ON
Test print mode
[0][9]
[Power] OFF
Hand over to user
*3
[0][9]
[0][9] [0][9]
*1
*2
[0][4] [9][S] [6][S]
List print mode
Unit replace mode