Selco Genesis 4000 MSE, Instruction Manual

Page: 61 / 376

61
GENESIS 5000 MSE GENESIS 5000 MSE
Power supply voltage U1 (50/60Hz) 3x400Vac ±15% 3x400Vac / 3x230Vac ±15%
Zmax (@PCC) 49m Ω * 49m Ω *
Slow blow line fuse 30A 30A / 63A
Communication bus DIGITAL DIGITAL
MMA maximum input power (kVA) 23.6 kVA 23.6 kVA / 24.5 kVA
MMA maximum input power (kW) 22.5 kW 22.5 kW / 23.3 kW
TIG maximum input power (kVA) 18.2 kVA 18.2 kVA / 18.9 kVA
TIG maximum input power (kW) 17.4 kW 17.4 kW / 18.0 kW
MIG/MAG maximum input power (kVA) 22.9 kVA 22.9 kVA / 23.9 kVA
MIG/MAG maximum input power (kW) 21.9 kW 21.9 kW / 22.7 kW
Power factor PF 0.95 0.95
Efficiency ( μ ) 88% 88% / 87%
Cos
ϕ
0.99 0.99
Max. input current I1max 33A 33A / 61.5A
Effective current I1eff 23.9A 23.9A / 38.9A
MMA duty factor (40°C)
(x=40%) - - / 500A
(x=50%) 500A 500A / -
(x=60%) 470A 470A / 450A
(x=100%) 420A 420A / 400A
MMA duty factor (25°C)
(x=80%) 500A 500A / -
(x=100%) 470A 470A / -
TIG duty factor (40°C)
(x=50%) 500A 500A / 500A
(x=60%) 470A 470A / 470A
(x=100%) 420A 420A / 420A
TIG duty factor (25°C)
(x=80%) 500A 500A / -
(x=100%) 470A 470A / -
MIG/MAG duty factor (40°C)
(x=40%) - - / 500A
(x=50%) 500A 500A / -
(x=60%) 470A 470A / 450A
(x=100%) 420A 420A / 400A
MIG/MAG duty factor (25°C)
(x=80%) 500A 500A / -
(x=100%) 470A 470A / -
Adjustment range I2 3-500A 3-500A
Open circuit voltage Uo 73Vdc 73Vdc
IP Protection rating IP23S IP23S
Insulation class H H
Dimensions (lxdxh) 690x290x510 mm 690x290x510 mm
Weight 37 kg. 38.5 kg.
Manufacturing Standards EN 60974-1 / EN 60974-10 EN 60974-1 / EN 60974-10
Power supply cable 4x4 mm2 4x4 mm2
Length of power supply cable 5 m 5 m
*
This equipment complies with EN/IEC 61000-3-11.
*
This equipment complies with EN/IEC 61000-3-12 if the maximum permissible mains impedance at the interface point to the public grid
(point of common coupling, PCC) is smaller than or equal to the Zmax stated value. If it is connected to a public low voltage system, it is
the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the
equipment may be connected.