Screen Print & Inkjet Fast T-Jet Blazer Pro User Manual Download Page 124

Page: 124 / 138

Fast T-Jet Blazer Pro User’s Manual

110

number. It is often easier if you fax or E-mail a support question before calling for

help. Calls to our Support Center are toll free from within the US. Calls from

outside the US are NOT toll free.

24 Hour Support

Email support is available at

[email protected]

24 hours a day, 7 days a

week. In addition, 24 hour

Emergency

Support

is available by calling toll free

1-888-MYTJETS

. A technician will be paged and he will return your call as soon as

possible.

Whether corresponding via E-mail or leaving a message for the Emergency

Support Technician,

please include your full company name, contact name,

phone number, address, serial number and a detailed description of the

problem.

Webcam Video Support

You can purchase an inexpensive web cam for your

computer and talk LIVE to one of our support technicians.

More information about how to use this amazing support

technology is on the

Fast T-Jet Blazer Pro

Support page at

www.screenprinters.net

Free Personalized Internet Web Support

Our Technical Support site is a secure and

personalized area where Fast T-Jet User’s can

download the latest software updates, view

technical articles and much more. In order

to protect your privacy and customize our

support for your needs, your will be required

to create a unique Log-in with a

User Name

and

Password

After receiving your printer and/or any

additional products, please locate their serial

numbers and have them handy when you first need support. A simple

interface will record and verify your product information and immediately

provide access to any updates and documents pertaining to your purchase.

Visit our support site by going to

www.screenprinters.net

and clicking on the

Summary of Contents for Fast T-Jet Blazer Pro











































































































































Search results

Summary of Contents for Fast T-Jet Blazer Pro

Reviews:

Related manuals for Fast T-Jet Blazer Pro

Brands by name

Popular brands

Screen Print & Inkjet Fast T-Jet Blazer Pro, User Manual

Search results

Summary of Contents for Fast T-Jet Blazer Pro

Reviews:

Related manuals for Fast T-Jet Blazer Pro

Brands by name

Popular brands