Screen Print & Inkjet Fast T-Jet Blazer Pro, User Manual

Page: 94 / 138

Non-Textile Printing Tips
When brushing on any of the treatments, make sure they are applied in o
smooth, even and thin layers.
Having two brushes can make the pretreatment and priming processes
o
easier. Use one for the Non-Textile Primer and one for the Non-Textile
Pretreatment.
Cleaning the brushes when done with hot water and letting dry will prevent
o
them from drying out and ruining the brushes.
When printing on Non-Textile items, use a piece of film that covers the whole
o
item and print a test print on the film to see if it is in alignment with the desired
printing area.
The maximum printable area of a Fast T-Jet Blazer Pro is 17” x 45”. To
o
maximize production, you can line up multiple items to print more then one
item at a time.
If you have a Heat Press, you may dry items faster by placing them under
o
the element, but you MUST avoid contact between the item and the heated
surface.
80
Fast T-Jet Blazer Pro User’s Manual