Screen Print & Inkjet Fast T-Jet Blazer Pro, User Manual

Page: 21 / 138

Chapter 2
Unpacking and Setup
Save the crate and all the packing!
Failure to follow this step will VOID YOUR WARRANTY.
Your Fast T-Jet Blazer Pro is a very large piece of equipment and it is shipped
in a sturdy crate with bracing to hold delicate components in place. Unpack
your printer with care and please retain all shipping materials, bags, boxes and
directions received with the printer. These items will be needed in the event the
machine must be returned for repair or transported to another location. If you
return or ship a Fast T-Jet Blazer Pro without using the original shipping carton you
may void the warranty. The crate may be disassembled for storage.
Unpacking your Fast T-Jet Blazer Pro
The Fast T-Jet Blazer Pro is shipped fully
assembled in one large crate. The only
additional item you will need to install is the
User Interface (UI).
You should have received and signed a
Pre-Installation Checklist prior to the arrival
of your printer. This Checklist outlined the
importance of room conditions, uncrating
and assembly and all the other details
necessary for your machine to maintain
optimal performance levels,
Important Note:
The printer and base weigh over 400 pounds.
Because of the bulk of the machine, this is a
FOUR PERSON lift. DO NOT attempt to lift the
machine from the crate with less than four
people. Position one person at each of the
four corners of the machine and make sure
that lifting is done from the base as identified
on the right.
7
Lift all four
corners evenly
from this point