Screen Print & Inkjet Fast T-Jet Blazer Pro, User Manual

Page: 42 / 138

To begin the 1. Head Alignment process, place your printer in “Paper Out (Roll
Cut)” mode. The LCD Display will read “Paper Out” and display the “roll” icon
in addition to the “scissors” icon.
Press the LEFT arrow button twice to get the LCD Display to read “Ready.”
2.
On the User Interface, cycle through the various screens until you reach the 3.
Mode Select Screen. Make sure the virtual dial is set to “Manual.”
Use the “Hand Arrows” to reach the MMMU Screen. Use the
4. For button under
the heading Jog to move the Print Assembly forward approximately 4-6
inches.
On the LCD Control Panel, press the LEFT arrow once until it displays “Ready
5.
(Roll Cut).”
Prepare 1-2 sheets of film to cover an area 16” x 24” (41 cm x 61 cm) in size. 6.
You may also use paper to print the Head Alignment images, however it will
be very difficult to see White ink on White paper. Align your paper or film with
the upper left hand corner of Shirtboard #1.
From the UI MMMU screen press the
7. Index button to move the Print Assembly
to its Index Position (the front of Platen).
On the printer LCD Control Panel, hit the 8. Enter Key /RIGHT Arrow button once.
The LCD Display will read, “Printer Setup.”
Press the Down Arrow key 5x until the LCD Display reads, “Head Alignment.”
9.
Press the 10. Enter key once and the LCD will display, “Paper Thkns.”
Press the 11. Down Arrow once to “Alignment.”
Press the 12. Enter key once to see “Alignment Auto.”
Press the 13. Down Arrow to see “Alignment Manual.”
Press the 14. Enter key once and the LCD will display, “Alignment Manual Uni-D.”
Press the 15. Down Arrow to select “Alignment Manual Bi-D All.”
Press the 16. Enter key to begin printing.
The print process will take approximately 10 minutes. When it is complete, you 17.
will see two columns and three groups of lines (marked #1, #2 and #3) and
color swatches. These groups will consist of:
• 12 vertical lines numbered 1-9
• 9 Swatches for each of the three colors
Cyan (C), Magenta (M) and
Yellow (Y) numbered 1-9
28
Fast T-Jet Blazer Pro User’s Manual