Screen Print & Inkjet Fast T-Jet Blazer Pro, User Manual

Page: 86 / 138

Fast T-Jet Blazer Pro User’s Manual
72
FastARTIST refers to its page dimensions in terms of width and
“height.” For purposes of printing a two-dimensional image on a
garment or non-textile item, it is important to be aware of the fact
that “height” means the same thing as “length.”
FastARTIST Page Size – Go to Layout > Page Size
FastRIP Setup – Go to File > FastRIP Setup
For more information about printing on caps or Non-Textile, such as golf balls,
there is a downloadable PDF available at www.screenprinters.net .
Adjusting the Platen Height
For the best prints, the printable surface should set to 1/8inch (3mm) below the
Print Head. If the item has a seam or excess fabric, these areas should be lower
than the main printing surface.
Ensure the garment or non-textile item does not sit closer to the
print head than the preferred of 1/8inch (3mm).