Screen Print & Inkjet Fast T-Jet Blazer Pro, User Manual

Page: 133 / 138

Miscellaneous Information
Noise level of the equipment: Average 72 dBA; peak 78 dBA.
Equipment transportation
and storage range: 40° F to 120° F (5° C to 55° C).
Unit is mounted on lockable, leveling casters to facilitate location placement.
Shipping and Receiving
U.S. Screen will ship the machines and components via a common ground
carrier of their choice unless otherwise specified by the Customer. Shipment will
be FOB Tempe, Arizona. This means the Customer will pay for all freight charges,
insurance, special delivery needs (home delivery) and the unloading of the
machine upon delivery.
Receiving Inspection
Inspect the crates and cartons for any damage. If possible, do this with the
delivery carrier’s agent present. Photograph any damage and immediately file
a claim with the carrier. Carriers cannot be held legally responsible for shipping
damage unless they are notified within 15 days of delivery.
Shipment Movement
Use appropriate personnel and equipment to move the equipment from the
transportation truck to the receiving area to the staging area. Measure aisle,
doorways and archways to ensure that there is enough clearance for the Fast
T-Jet Blazer Pro printer to pass unobstructed (36 inches / 92 cm). Verify that
elevators or other lifting devices will hold the weight of the equipment (400 lb. or
182kg).
Common carriers are NOT required to unload shipments over 100 lb. (45 kg).
You must be prepared to remove your printer from the truck with a forklift. If
possible, request a truck with a lift gate so you can use a pallet jack to move the
equipment securely.
Staging Area
Provide a sheltered area for receipt of the shipment. This area should be close to
the intended area of operation to facilitate unpacking and preparation of the
equipment for set up.
119
Appendix A- Operational Guide