Scout Boats 222 Abaco, Owner'S Manual

Page: 96 / 116

96
14.3 Recommissioning
DO NOT OPERATE THE BOAT UNLESS IT IS
COMPLETELY ASSEMBLED. KEEP ALL FASTENERS
TIGHT. KEEP ADJUSTMENTS ACCORDING TO
SPECIFICATIONS.
Note: It is important and recommended that the fitting
out procedure for the marine gear be done by a
qualified service person. Read the engine owner’s
manual for the recommended procedure.
BEFORE LAUNCHING THE BOAT, MAKE SURE THE
HULL DRAIN PLUG IS INSTALLED.
Reactivating The Boat After Storage:
• Charge and install the batteries.
• Install the drain plug in the hull.
• Check the engine for damage and follow the
manufacturer’s instructions for recommissioning.
• Check the mounting bolts for the engine to make sure
they are tight.
• Perform all routine maintenance.
• Check all hose clamps for tightness.
• Pump the antifreeze from the freshwater and raw water
systems and flush several times with freshwater. Make
sure all antifreeze is flushed from the head before it is
activated.
• Check and lubricate the steering system.
• Clean and wash the boat.
• Install all upholstery, cushions and canvas.
After Launching:
• Carefully check all water systems and the engine bolts
for leaks. Operate each system one at a time checking
for leaks and proper operation.
• Check the bilge pump manual and automatic switches.
• When the engine starts, check the cooling system port
below the engine cowling for a strong stream of water.
This ensures that the cooling pump is operating.
• Carefully monitor the gauges and check for leakage and
abnormal noises.
• Operate the boat at slow speeds until the engine
temperature stabilizes and all systems are operating
normally.