Scout Boats 222 Abaco, Owner'S Manual

Page: 47 / 116

47
Chapter 8:
VENTILATION SYSTEM
8.1 Cabin Ventilation
Ventilation to the cabin area is provided by a deck hatch and
opening port windows.
Deck Hatch (Abaco)
The deck hatch is supported in the open position by an ad-
justable hatch adjuster. To close the hatch, loosen the hatch
adjuster and lower the hatch. Secure in the closed position
with the two cam levers on the inside of the hatch.
The cam levers can secure the hatch in two positions, the vent
position and fully closed. The hatch is secured in the vent
position by opening hatch slightly until the cam levers align
with the notch in the hatch frame just above the fully closed,
watertight position. With the cam levers secured in this posi-
tion, the hatch will be open just enough to let air circulate
into the cabin. Always secure the hatch in the water tight
position when leaving the boat unattended or when running
offshore.
When the hatch is open, a removable screen can be installed
in the hatch trim ring to prevent insects from entering the
cabin. The screen is secured in place by four twist locks. The
screen must be removed to open or close the hatch.
Port Window (Abaco and Sportfish)
Ventilation to the head compartment on the Sportfish is pro-
vided by an opening port window. The are two port windows
for the cabin on the Abaco. The port windows are equipped
with a screen and are secured in the closed position by three
twist action locks. The locks should be adjusted so they are
tight enough to seal the window in the closed position, but
not so tight that they break the plastic.
Always make sure the windows are closed and secured with
the cam levers whenever the boat is underway. Sea spray
could enter the cabin through an open window and damage
upholstery, woodwork and cabin equipment.
Deck Hatch
Port Window Open
Port Window Closed