manualshive.com logo in svg

SATO S84NX, Operator'S Manual, Page: 529 / 588

Share
Download
SATO S84NX Operator'S Manual Download Page 529

529

Error Message 1141 (Printing was aborted halfway)

When there is an error with the product, the error message appears on the screen.
Check the cause and countermeasure, and then take appropriate action.
 

To clear the error:

Press the 

 button (OFFLINE) or 

 button to switch to Offline mode.

Then, press the 

 button to feed and eject the labels that have been printed halfway through.

Cause and Countermeasure

Cause

In dispense & print mode, printing was interrupted by a cancel operation or error.

Countermeasure

Press the 

 button (OFFLINE) or 

 button to switch to Offline mode, and then press

the 

 button to feed and eject the labels that have finished printing part way.

 

Contact your SATO technical support if the error cannot be resolved.

Contact Information for When You Are in Trouble

Summary of Contents for S84NX













































































































































































































































































































































































































































































































































































































Reviews:

No comments