manualshive.com logo in svg

SATO S84NX, Operator'S Manual, Page: 393 / 588

Share
Download
SATO S84NX Operator'S Manual Download Page 393

393

 

•

When the barcode checker is powered on, it emits a laser light. Be sure to keep the

laser away from your eyes.

•

When using GFS4170, it keeps emitting a laser light while the product is powered on.

To turn off the laser light, power off the product.

Once the connection between the product and the barcode checker is complete, the barcode

checker icon appears on the status bar of the display.

2. When the product is in Online mode, press the 

 button on the operator panel to

change to Offline mode.

3. Press the 

 button to show the [Settings] menu.

Summary of Contents for S84NX













































































































































































































































































































































































































































































































































































































Reviews:

No comments