manualshive.com logo in svg

SATO S84NX, Operator'S Manual, Page: 251 / 588

Share
Download
SATO S84NX Operator'S Manual Download Page 251

251

You can change this if you have selected [Custom] in the [Code Type] menu.
The setting range is from 00 to ff (hexadecimal).

[Label Rotation]

Set the page orientation for label printing.
The label size set in the product is used as a reference for rotation.
The options are as follows:
0 degree

Labels are printed in a portrait orientation.

90 degree

Labels are printed in a landscape orientation.

180 degree

Labels are printed in an inverse-portrait orientation.

270 degree

Labels are printed in an inverse-landscape orientation.

 

[SOP Emulation]

Set the SOP emulation.
The options are as follows:

•

[Disabled]

•

[Prodigy Plus - 110]

•

[Allegro - 220]

•

[Prodigy - 250]

•

[Auto]

[Compatible Mode]

Set the compatible mode for SDPL.
The setting items are as follows:

[TTF]

Enable or disable TrueType font compatible mode.
The options are as follows:
Enabled

Enable TrueType font compatible mode. The bold TrueType fonts are printed in smaller pitch.

Disabled

Disable TrueType font compatible mode.

 

[Graphics]

Set whether to allow the registration of graphic data even if a line feed code is omitted.

Summary of Contents for S84NX













































































































































































































































































































































































































































































































































































































Reviews:

No comments