SATO S84NX, Operator'S Manual, Page: 258 / 588

[AEP]
258
Disabled
Disable the SOH-C command.
[Others]
Enable or disable the SOH commands other than the SOH-B and SOH-C commands.
Available if you have selected [Custom] in the [All Commands] menu.
The options are as follows:
Enabled
Enable the SOH commands other than the SOH-B and SOH-C commands.
Disabled
Disable the SOH commands other than the SOH-B and SOH-C commands.
[Module Selection]
Select where to save the product settings.
You can change this setting if you have selected [Settings] in the [Prioritize] > [Module Selection]
menu.
You can select from A, B, C (Assigned by <STX> X), D, F, G, H, I, J, X, Y, and Z.
[SEPL]
This setting menu is to use SEPL as a printer command.
Contact your SATO sales representative for more information about the use of SEPL command.
[AEP]
Set the functions for AEP (Application Enabled Printing).
AEP mode allows you to use the product as a stand-alone printer by running applications within the
product.
Use the standard application, or install custom applications to the product from a USB memory, All-In-
One Tool, WebConfig page, etc.
In AEP mode, you can use USB keyboards and barcode scanners to input data.
The setting items are as follows:
• Contact your SATO sales representative for more information about the use of AEP
mode.
[Enable]
Enable or disable AEP (Application Enabled Printing) mode.
The options are as follows: