Home
/
SATO
/
S84NX
/
Operator'S Manual

SATO S84NX, Operator'S Manual, Page: 299 / 588

Share

Page: 299 / 588

SATO S84NX Operator'S Manual Download Page 299

299

Name

Shows the name of the build version.

Date

Shows the build date.

Checksum

Shows the checksum of the build version.

Kernel Version

Shows the kernel version of the product.

Boot Version

Shows the boot version of the product.

[Applications]

Shows the versions of the applications installed in the product, such as printer languages.

[Installation Log]

Show or clear the installation log data in the product.

Press the

button (CLEAR) to clear the selected log data.

•

This screen does not appear if there is no log data in the product.

The setting items are as follows:

[RPM log]

Shows a list of RPM log files containing three sections: installed, updated and obsolete.
The RPM log file is created after installing a pkg-file containing rpm-files.

[System Restore]

Shows the system restore log.
The system restore log file is created after installing a pkg-file that caused a state in which the

product's operator panel cannot be operated.

[Print Module]

Shows information about the print module on the product.
The items are as follows:
Boot

Shows the Boot firmware version.

«
...
297
298
299
300
301
...
»

Summary of Contents for S84NX













































































































































































































































































































































































































































































































































































































Reviews:

No comments