SATO S84NX Operator'S Manual Download Page 15

Page: 15 / 588

Trademarks

•

The following are registered trademarks of SATO Holdings Corporation and its subsidiaries in

Japan, the U.S. and other countries.

◦

SATO

◦

Stylized SOS (SATO Online Services)

•

NiceLabel

is a trademark or registered trademark of Euro Plus d.o.o.

•

Bartender

is a trademark of Seagull Scientific, Inc.

•

QR Code is a registered trademark of DENSO WAVE INCORPORATED.

•

Wi-Fi

is a registered trademark of Wi-Fi Alliance.

•

The following are trademarks of Wi-Fi Alliance.

◦

Wi-Fi Direct

◦

Wi-Fi Protected Setup

◦

WPA

◦

WPA2

•

Windows and Microsoft Edge are registered trademarks of Microsoft Corporation in the United

States.

•

Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A.

•

Android, YouTube, the YouTube logo, and Google Chrome are trademarks of Google LLC.

•

The following are registered trademarks of Apple Inc., registered in the U.S. and other countries.

◦

iPad

◦

iPhone

•

IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used

under license.

•

Atheros is a registered trademark of Qualcomm Atheros, Inc.

•

All other trademarks are the property of their respective owners.

Summary of Contents for S84NX












































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for S84NX

Reviews:

SATO S84NX, Operator'S Manual, Page: 15 / 588

Search results

Summary of Contents for S84NX

Reviews: