manualshive.com logo in svg

SATO S84NX, Operator'S Manual, Page: 199 / 588

Share
Download
SATO S84NX Operator'S Manual Download Page 199

199

[Enable]

Enable or disable the functions for NTP.
The options are as follows:
Enabled

Enable the NTP function.

Disabled

Disable the NTP function.

 

[Error]

Set to show the NTP error message if detected.
The options are as follows:
Enabled

Shows the error message.

Disabled

Does not show the error message.

 

[Time Server IP]

Set the IP address of the NTP server.
The setting range is as follows:
0.0.0.0 to 255.255.255.255
 
The IP address should normally be set to 0.0.0.0 (the default value). For the default value, the global

NTP servers are assigned automatically. Set to a valid IP if the time synchronization is requested for a

specific server.

[LPD]

Set the functions for LPD.
The setting items are as follows:

[Enable]

Enable or disable the LPD function.
The options are as follows:
Enabled

Enable the LPD function.

Disabled

Disable the LPD function.

 

[DNS Lookup]

Enable or disable the DNS Lookup function.

Summary of Contents for S84NX













































































































































































































































































































































































































































































































































































































Reviews:

No comments