manualshive.com logo in svg

SATO S84NX, Operator'S Manual, Page: 211 / 588

Share
Download
SATO S84NX Operator'S Manual Download Page 211

211

[QR code offset] (SOS users only)

Adjust the print position for printing a QR code displayed on the notification screen for SOS (SATO

Online Services).
Appears only if you have selected [On-Demand] in the [SOS Mode] menu.
Available only if you have selected [Print] in the [Update Screen] menu.
The setting items are as follows:
Vertical

Adjust the print position of the QR code in the vertical direction.
Set the correction value from the print reference position as "-" for the direction of the paper feed

and "+" for the direction opposite to the paper feed.

Standard/Left-Hand Type

Opposite/Right-Hand Type

(1) Feed direction

 

(1) Feed direction

 

The setting range is from -792 to +792 dots.

Horizontal

Adjust the print position of the QR code in the horizontal direction.
Set the correction value from the print position when facing the product as "-" to adjust to the back

side and "+" to adjust to the front side.

Summary of Contents for S84NX













































































































































































































































































































































































































































































































































































































Reviews:

No comments