SATO S84NX, Operator'S Manual, Page: 391 / 588

391
Code Type Available code formats
ITF
Industrial 2 of 5
Matrix 2 of 5
MSI
GS1-128
POSTNET
IMB (USPS)
GS1 DataBar Omnidirectional
GS1 DataBar Truncated
GS1 DataBar Limited
GS1 DataBar Expanded
GS1 DataBar Stacked
GS1 DataBar Stacked Omnidirectional
GS1 DataBar Expanded Stacked
2D Codes PDF417
Micro PDF417
Maxi Code
QR Code
Micro QR Code
Data Matrix
Aztec Code
Combined Symbols JAN/EAN-13/8(CC-A/CC-B)
UPC-A/UPC-E(CC-A/CC-B)
GS1-128(CC-A/CC-B/CC-C)
GS1 DataBar(CC-A/CC-B)
• To use the comparison mode, create barcodes by using barcode commands. If a
barcode such as graphic data (BMP image, etc.) or a preprinted barcode is placed
within the barcode readable area, this mode may not function correctly.
• In readable mode, you can include barcodes that are not created by barcode
commands (such as graphic data or preprinted barcodes) as the check target. To do
this, select [Setting] in [Set No. of Barcodes], and specify the number of barcodes
per label in [Barcodes per Label]. However, there may be a case that those barcodes
cannot be read by scanners thus this mode does not function correctly.