SATO S84NX Operator'S Manual Download Page 41 | Manualshive

Page: 41 / 588

SATO S84NX Operator'S Manual Download Page 41

41

Icon

Description

Product is connected to USB host.

Waiting for external input/output signal.

RFID mode is enabled. (S84NX only)

RFID mode is enabled, but the system is defective. (S84NX only)

Standard code is disabled.

The On-Demand mode of the SOS (SATO Online Services) is enabled.

The Real Time mode or the Light mode of the SOS is enabled. The product is

connected to the SOS cloud.

The Real Time mode or the Light mode of the SOS is enabled, but not connected

to the SOS cloud.
If the LAN or Wi-Fi icon is grayed out, the product is not connected to the network.
If the LAN or Wi-Fi icon is active, the Internet connection of the SOS cloud has a

trouble.

The product is not connected to the SOS cloud.

«
...
39
40
41
42
43
...
»

Summary of Contents for S84NX













































































































































































































































































































































































































































































































































































































Reviews:

No comments