manualshive.com logo in svg

SATO S84NX, Operator'S Manual, Page: 412 / 588

Share
Download
SATO S84NX Operator'S Manual Download Page 412

[Interface] Menu

412

Initial Value

Setting Item

S84NX

S86NX

Initialized by

User Reset/

Factory Reset

 

 

[Shift Name]

-

Yes/Yes

[Interface] Menu

Initial values refer to the values set for the product when it was shipped from the factory. If you reset

the product, the values set in the product are initialized. The table below shows the initial value of each

setting item and whether it would be initialized.

•

[Network]

 > 

[Settings]

•

[Network]

 > 

[Services]

 > 

[Ports]/[NTP]/[LPD]/[FTP]/[SNMP]

•

[Network]

 > 

[Services]

 > 

[Online Services]

•

[Network]

 > 

[Advanced]

•

[RS-232C]/[USB]/[NFC]/[Ignore CR/LF]/[Ignore CAN/DLE]

•

[External I/O]

•

[RFID]

 

•

Normally, it is not necessary to perform the initialization. Doing an initialization removes

all the product's settings that the customer changed.

 

•

[Network]

 > 

[Settings]

Initial Value

Setting Item

S84NX

S86NX

Initialized by

User Reset/

Factory Reset

[LAN]

 

[IPv4]

 

 

[Mode]

[DHCP]

Yes/Yes

 

 

[DHCP]

-

-

 

 

[IP Address]

0.0.0.0

Yes/Yes

 

 

[Netmask]

255.255.255.0

Yes/Yes

 

 

[Gateway]

0.0.0.0

Yes/Yes

 

 

[DNS]

0.0.0.0, 0.0.0.0, 0.0.0.0

Yes/Yes

 

[IPv6]

 

 

[Mode]

[Disable]

Yes/Yes

 

 

[DHCP]

-

-

Summary of Contents for S84NX













































































































































































































































































































































































































































































































































































































Reviews:

No comments