Home
/
SATO
/
S84NX
/
Operator'S Manual

SATO S84NX, Operator'S Manual, Page: 207 / 588

Share

Page: 207 / 588

SATO S84NX Operator'S Manual Download Page 207

207

On-Demand

Shows the product information with a QR code. Scan the displayed QR code with a tablet or

smartphone and send the information to the SOS cloud. Also, the product information can be

acquired via NFC and sent to the SOS cloud. This connection allows you to check the product's

operating information via SOS Web. A specialized SOS application is required to scan the QR

code or send the product information to the SOS cloud.

Real-Time

Sends the product information to the SOS cloud in real-time using the LAN/wireless LAN

connection. This connection allows you to check the product's operating information and to check

or modify the product's settings via SOS Web. Confirm and agree with the Terms of Use to enable

the Real-Time mode.

Light

Sends the product information to the SOS cloud in real-time using the LAN/wireless LAN

connection. This connection allows you to check the product's operating information via SOS

Web.

[Allow Remote Control] (SOS users only)

Set whether or not to allow setting the product (remote control) from SOS (SATO Online Services).
Appears only if you have selected [Real-Time] in the [SOS Mode] menu.
The options are as follows:
Deny

Does not allow remote control from SOS.

Until Reboot

Allows remote control from SOS until the product reboots.

Always

Always allows remote control from SOS.

[MQTT Protocol] (SOS users only)

Set the communication protocol of MQTT.
Appears only if you have selected [Real-Time] in the [SOS Mode] menu.
The options are as follows:
MQTT

Set this to use port number 443 and 8883 to do MQTT communication.

MQTT over WebSocket

Set this to use port number 443 only to do MQTT communication.

[MQTT Proxy enabled] (SOS users only)

Enable or disable the MQTT proxy when using MQTT over WebSocket.
Appears only if you have selected [Real-Time] in the [SOS Mode] menu.
Available only if you have selected [MQTT over WebSocket] for [MQTT Protocol] and if an enabled

proxy has been set.

«
...
205
206
207
208
209
...
»

Summary of Contents for S84NX













































































































































































































































































































































































































































































































































































































Reviews:

No comments