manualshive.com logo in svg

SATO S84NX, Operator'S Manual, Page: 478 / 588

Share
Download
SATO S84NX Operator'S Manual Download Page 478

478

Error Message 1005 (Framing Error)

When there is an error with the product, the error message appears on the screen.
Check the cause and countermeasure, and then take appropriate action.
 

To clear the error:

Press the 

 button (OFFLINE) or 

 button, or adjust the settings.

Cause and Countermeasure

Reference

Cause (1)

RS-232C settings are incorrect.

Countermeasure (1)

Set the interface settings of the product again.

 

RS-232C

Cause (2)

The RS-232C cable is not connected

correctly.

Countermeasure (2)

Power off the product, connect the RS-232C

cable correctly, and then power on the product

again.

 

Powering On/Off the Product

RS-232C Interface Connection (Standard)

Contact your SATO technical support if the error cannot be resolved.

Contact Information for When You Are in Trouble

Summary of Contents for S84NX













































































































































































































































































































































































































































































































































































































Reviews:

No comments