manualshive.com logo in svg

SATO S84NX, Operator'S Manual, Page: 210 / 588

Share
Download
SATO S84NX Operator'S Manual Download Page 210

[Network]

210

The setting range is from 1 to 3.

[Weekday] (SOS users only)

Specifies the day of the week to perform the periodic notification.
Appears only if you have selected [Weekly] in the [Type] menu.
The setting range is from Sunday to Saturday.

[Day] (SOS users only)

Sets the date to perform the periodic notification.
Appears only if you have selected [Monthly] in the [Type] menu.
The setting range is from 1 to 28.

[Time 1] (SOS users only)

Specifies the time to perform the first periodic notification.
Appears only if you have selected [Daily] in the [Type] menu.

[Time 2] (SOS users only)

Specifies the time to perform the second periodic notification.
Appears only if you have selected [Daily] in the [Type] menu and have set more than two times for

[Notifications].

[Time 3] (SOS users only)

Specifies the time to perform the third periodic notification.
Appears only if you have selected [Daily] in the [Type] menu and have set three times for

[Notifications].

[Time] (SOS users only)

Specifies the time of the specified day or date to perform periodic notifications.
Appears only if you have selected [Weekly] or [Monthly] in the [Type] menu.

[Update Screen] (SOS users only)

Sets whether to print a QR code displayed with SOS (SATO Online Services) periodic notification or

Daily Checkup.
Appears only if you have selected [On-Demand] in the [SOS Mode] menu.
A specialized application is required to scan the QR code.
The options are as follows:
Normal

Shows the scan screen of a normal QR code.

Print

You can execute printing in the scan screen for the QR code. Press the 

 button to print

the QR code.
To print the QR code, use media of more than 33 mm (1.3") in length and more than 33 mm (1.3")

in width (not including the liner).

 

Summary of Contents for S84NX













































































































































































































































































































































































































































































































































































































Reviews:

No comments