SATO S84NX, Operator'S Manual, Page: 189 / 588

189
1. Select [Button (PBC)] in the [Wi-Fi Protected Setup] menu and press the
button.
2. When [Scanning...] appears on the screen, press the WPS button on the access point of the
wireless LAN device.
3. When the connection to the access point is established, [Successfully configured.] appears on the
screen.
• When the connection to the access point is failed, [Failed to find an Access Point.]
appears on the screen.
[PIN]
Set the wireless LAN connection using the PIN code method.
1. Select [PIN] in the [Wi-Fi Protected Setup] menu and press the
button.
2. When [Scanning...] appears on the screen, set the PIN code shown on the screen to the access
point of the wireless LAN or computer.
3. When the connection to the access point is established, [Successfully configured.] appears on the
screen.
• When the connection to the access point is failed, [Failed to find an Access Point.]
appears on the screen.
[Wi-Fi Direct]
Set the Wi-Fi Direct function.
The Wi-Fi Direct function is enabled if you have selected [Infrastructure] in the [Mode] menu. If you
have changed the setting from [Ad-hoc] to [Infrastructure] in the [Mode] menu, reboot the product
before setting the Wi-Fi Direct function.
The setting procedure is as follows:
1. Set the device name for the product using [Device Name]. You can enter 1 to 32 characters.
Alphabets (capital and small letters), numbers and symbols can be used.
Press the
button to return to the [Wi-Fi] menu and press the button to enable
changes.
2. Select [Connect] to search and show the connectable device names or to accept connection
requests when the product is the GO (Group Owner).
Select the device name you want to connect using the
/ buttons, and press the
button.
3. Select [Start Group] if you want to start a new persistent group or select a group from the list.
4. Select [Remove Group] to remove the persistent group in step 3.
5. Complete the connection according to the display on the product or device you want to connect.
6. Select [Disconnect] if you want to stop the connection.